Skewed Bed Issues

General Discussion
1

Basic Information:

Printer Model: Creality /CR10S
MCU / Printerboard:
Host / SBC Pi 4
klippy.log

Hello! I have been having some print quality issues lately and I realized that my bed is very unlevel. I have an ABL sensor by TH3D and after probing my metal bed plate (w/o the printing surface) at 60C my range is always 1.1mm-1.4mm. Is this normal or not a problem, and if not, what do you guys recommend to fix it?

Screenshot (3)
Screenshot (3)1920×876 143 KB

2

image
image1920×952 142 KB

We need your klippy.log to be more specific.

3

klippy.log (1.5 MB)

I should mention that I have solid Bed mounts

4

You need to shim the right or shorten the left by 1.2mm Or tip your X axis rail down to compensate.

ABL should work as is but you’d need a HUGE fade distance.