So have had this happen tree times in a row now. Tried re-slicing, updated to latest klipper, and atm testprinting with swapped cable with theY axis one. I’m reading it most likely could be wiring, voltage or steppers. And also seeing that it could be PA related, and in one case usb related. (Will …

stepcompress o=6 i=0 c=4 a=0: Invalid sequence stepcompress o=6 i=0 c=4 a=0: Invalid sequence stepcompress o=6 i=0 c=4 a=0: Invalid sequence Exception in flush_handler Traceback (most recent call last): File "/home/pi/klipper/klippy/toolhead.py", line 392, in _flush_handler self.flush_step_gen…

So i did swap driver, cable and so on… I did end up changing the stepper to, and then things started working again. Have been printing 24/7 since then, and still good. I even seeing improved result in flow for sure! So, guess it was a bad stepper. Even being brand new.

I’m having the exact same issue, on the same brand new E3 Turbo BTT board. Weird. I have tried everything but changing the actual stepper. guess that’s next…

Yeah, on the extruder for you to? Also try changing the usb cable, if using one.

No, it’s usually stepper_y that’s reported, but sometimes stepper_x, y and z are reported, even though it always happens on y (only) moves in my testing.

Ohh man, yet another error now! :frowning: Looks the be reported on the extruder again!? The wierd thing is that i was opening mainsail on my PC, it was in pause mode due to filament change, ok so i go to change, pull out the filament and insert new, and then open mainsail on my phone, just to sud…

My solve…sensorless homing. It turned out to be a faulty endstop that was causing a short

Oh really?.. Hmm. Yeah i have tried removing the filament sensor, and still no error since then.

Best guess? Creality peripherals are cheap and faulty

TMC 'extruder' reports error: GSTAT: 00000001 reset=1(reset

General Discussion

the_dragon_no1 October 28, 2021, 10:18pm 10

Ohh dang Hmm… Yeah that sucks!

TMC 'stepper_x' reports error: GSTAT: 00000001 reset=1(Reset)

Topic		Replies	Views
TMC 'extruder' reports error General Discussion	3	1725	February 9, 2022
Suddenly GSTAT Error 00000001 reset=1 General Discussion	13	326	November 16, 2024
TMC 'stepper_x' reports error: GSTAT: 00000001 reset=1(Reset) General Discussion	16	17744	June 16, 2024
TMC 'stepper' reports GSTAT: 00000001 reset=1(Reset) Knowledge Base	0	1632	November 1, 2024
'extruder' reports error: drv_status: 40140060 s2vsb=1(shorttosupply_b!) ola=1(openload_a!) cs_actual=20 stealth=1 General Discussion	22	318	December 17, 2025

TMC 'extruder' reports error: GSTAT: 00000001 reset=1(reset

Related topics