Unable to parse rotation_distance on additional stepper motors

[Kaoss]

Basic Information: tryin to config additional stepper motors for 3in1 hotend

Printer Model: ender 5 plus
MCU / Printerboard: SKR PRO 1.2
Host / SBC
klippy (1).log (591.5 KB)
config-20240729-165948.zip (4.9 KB)

klippy.log

Fill out above information and in all cases attach your klippy.log file (use zip to compress it, if too big). Pasting your printer.cfg is not needed
Be sure to check our “Knowledge Base” Category first. Most relevant items, e.g. error messages, are covered there

Describe your issue:

hello All, i’m receiving an “unable to parse rotation_distance” on an additional stepper motor, in order to multicolor print with my 3in1 hotend. the extruder stepper motor works fine and i can print without problems. when uncommenting the new motors, i have this error. if rotation_distance is commented, the error is that is needed. I’ve tried to put : and = to no result.
I’ve attached both my log and the config i’m trying to fix.

Thanks for your help!
…

[Sineos]

Delete the red boxes or comment them out

[Kaoss]

I am appalled and SO disappointed in myself for having missed something like that

Thank you!
Now i have only to figure out the bunch of syncing problems i’m facing.