Error between keyboard and chair, I did not tell Mainsail to use the camera. Voron 2.4d Leviathan/RPi 4b I have updated everything I know how to update. I’m trying to install crowsnest via kiauh, same as I did before (which worked). I had the camera working with crowsnest. I had some problem that …

From the OP: <a name="p-87574-inserror-insinsbetween-insinskeyboard-insinsand-insinschairinsinsins-insi-insinsdid-insinsnot-insinstell-insinsmainsail-insinsto-insinsuse-insinsthe-insinscamerainsinsins-1" class="anchor" href="#p-87574-inserror-insinsbetween-insinskeyboard-insinsand-insinschairinsinsins-insi-insinsdid-insinsnot-insinstell-insinsmainsail-insinsto-insinsuse-insinsthe-insinscamerainsinsins-1" aria-label="Heading link"> Error between keyboard and chair, I did not tell Mainsail to use the camera.

Spyglass does not support 32-bit OS images. @mryel00 explains it in detail here Upgrade guide v4 -> v5 · Issue #327 · mainsail-crew/crowsnest · GitHub .

That’s decidedly odd. Before I reinstalled, I had the same setup, 32bit lite, with Crowsnest working fine, if a bit slowly.

If you insist in 32bit OS, I think from what mryel00 explained you could install crowsnet v4 manually and update to crowsnet v5 manually. Of course you can not use kiauh to install Klipper! But before you try I would ask here mainsail-crew · Discussions · GitHub . What kind of camera resolution and…

I have a Wansview 1080p ($11 on ebay). I did not adjust the resolution or frame rate; I get a frame rate of 8-10 fps typically. A bit jerky. I’m not locked into the 32bit, sounds like I should switch to 64bit.

Ok. Which model? 101, 102, 105, or 106? Yes, go for 64bit. Mainsail crew recommends 64bit OS. I don’t know if there is actually a recommendation from koconnor. Please set the thread to solved, if it’s solved.

It’s different at least, the errors are gone. I changed to 64bit lite on the pi, reinstalled Klipper etc. After Crowsnest installation, it shows as Incomplete (Kiauh). I don’t find any errors listed in the install process (see attached). The camera doesn’t work/exist from the Orca/Device page. When …

Why not try MainsailOS, it comes with all things installed…

A small explanation on the spyglass situation, v4 vs v5 and kiauh: As already linked I had to drop spyglass support for v5. Therefore you get this error during install because I decided for a lazy way of detecting if a package can be installed or not. We just try to install it, if it works you a…

Only the 64bit comes with everything installed. 32bit MainsailOS also has no Spyglass installed. You won’t find the 32bit MainsailOS in the rpi imager, if you select a specific device, as we do not recommend it ^^

Unmet dependencies--Crowsnest install

General Discussion

parchping May 19, 2026, 1:47am 9

Model 101. I’ll check out 64 bits in the morning and report here/mark solved.

Topic		Replies	Views
Problem with Pi-camera in mainsail General Discussion	4	14981	June 8, 2023
Camera Streamer just stopped working after my new update with crowsnest and fluidd Fluidd	4	1957	February 14, 2025
Crowsnest install - hosed General Discussion	2	436	April 16, 2024
Crowsnest webcam not working Frontends	7	2673	January 11, 2025
No pi cam after klipper update Frontends	5	1201	July 9, 2023

Unmet dependencies--Crowsnest install

Related topics