Basic Information:
Printer Model: Ratrig Fatboy
MCU / Printerboard: Octopus
Host / SBC Rpi3
klippy.log (919.7 KB) https://youtu.be/LyfVp4d67BA
Fill out above information and in all cases attach your klippy.log file (use zip to compress it, if too big). Pasting your printer.cfg is not needed
Be sure to check our “Knowledge Base” Category first. Most relevant items, e.g. error messages, are covered there
Describe your issue:
…Instead of trying to explain that my horizontal and vertical image resolution is fine, but my touch screen resolution seems to be like 3/4 at max i have made a video that might allow people here to assist with my issue. You will see the video link above, next to the klippy log
I addition to having tested a new DSI and the screen in another printer, i also just tested running a bullseye 32bit instead of 64bit. No change