Mago3D
December 12, 2023, 2:14am
1
Sorry for my basic questions, I’m still a newbie.
This has been a topic of discussion going back at least 6 years. The short answer is it would be very difficult to add support, and nobody has done it. The long answer is at the link.
opened 02:36AM - 28 Feb 18 UTC
closed 03:02PM - 13 Mar 18 UTC
inactive
The idea primarily is intended for supporting a "wireless" setup for the hotend/… extruder, so that most of the wires are coming from a secondary board instead of the primary board. with ESP32 we can pretty much just hook up a couple of mosfets and stepper driver to decouple the hotend/extruder electronics, leaving just the power cable required.