Basic Information:
Printer Model: anycubic vyper
MCU / Printerboard:
Host / SBC raspberry pi 3
klippy.log
klippy_rasp3_vyper_no_extruder.log (476.6 KB)
Hi, I have been trying klipper on a raspberry pi 5 and now raspberry pi 3 and i get everything to work but the extruder . wont start either I try a print or just purge. Ive tried to run the printer on the standard firmware and it will work again. Ive searched but cant find any solution . anyone had the same problem?
Thanks
…