Basic Information:
klippy (2).zip (2.6 MB)
Printer Model: K1C
MCU / Printerboard:
Host / SBC
klippy.log
Fill out above information and in all cases attach your klippy.log file (use zip to compress it, if too big). Pasting your printer.cfg is not needed
Be sure to check our “Knowledge Base” Category first. Most relevant items, e.g. error messages, are covered there
Describe your issue:
hello
I am using a Creality K1C printer Rooted and installed Fluidd to it
I am also using a 3DChemeleon manual Multi-filament unit which is controlled by a gcode to change the filament by pressing a button
I was printing a large print yesterday almost spent 14 hours and it’s at 64% now suddenly an error occurred for the first time
“MCU ‘nozzle_mcu’ shutdown: Missed scheduling of next digital out event”
and once I Restarted Klipper on the printer’s screen I can resume the print but it doesn’t actually resumes it heats the Nozzle and bed then stays still
in the fluidd page it doesn’t show me the X Y Z location
I uploaded the klippy log file and I want to know What caused this issue is it the large file?
and how do I resume my print T-T !!