Ender 3 v2 NEO Config file

Nige97 · January 15, 2023, 5:40pm

I’m not sure about the differences between the Ender 3 v2 and the Ender 3 v2 NEO, Either way I am looking for a Config file for an Ender 3 v2 NEO. Any help will be useful, thank you.

synlau · January 20, 2023, 10:59pm

i’m interested in too

bender007 · February 10, 2023, 3:58pm

You can download creality sonic pad, extract the firmware, extract rootfs and find all configs here: /usr/share/klipper-brain/printer_config3/config/printer-Ender3V2-Neo-CRtouch-V4.2.2.cfg

ender 3 v2 neo klipper config - Pastebin.com see here

shottogan · June 30, 2023, 2:23am

As of March 14th it’s included:

github.com

Klipper3d/klipper/blob/master/config/printer-creality-ender3-v2-neo-2022.cfg

# This file contains pin mappings for the stock 2022 Creality Ender 3
# V2 Neo. To use this config, during "make menuconfig" select the
# STM32F103 with a "28KiB bootloader" and serial (on USART1 PA10/PA9)
# communication.

# If you prefer a direct serial connection, in "make menuconfig"
# select "Enable extra low-level configuration options" and select
# serial (on USART3 PB11/PB10), which is broken out on the 10 pin IDC
# cable used for the LCD module as follows:
# 3: Tx, 4: Rx, 9: GND, 10: VCC

# Flash this firmware by copying "out/klipper.bin" to a SD card and
# turning on the printer with the card inserted. The firmware
# filename must end in ".bin" and must not match the last filename
# that was flashed.

# This also works for the GD32F303 based Creality 4.2.2 board.

# See docs/Config_Reference.md for a description of parameters.

This file has been truncated. show original

Topic		Replies	Views
Ender 3 max neo General Discussion	11	2759	February 16, 2024
Ender 6 skr mini v3 config for stock ender 6 General Discussion	6	1106	February 19, 2023
Sonic Pad On Ender 5 4.2.2 Board printer config General Discussion	7	2032	January 25, 2024
Ender 3 neo max cfg General Discussion	1	432	January 26, 2024
Creality Ender 5 Pro (2021) v4.2.7 motherboard + BL Touch Configs	20	10733	April 14, 2024

Ender 3 v2 NEO Config file

Related Topics