Printer Model:
MCU / Printerboard:
klippy.log
Fill out above information and in all cases attach your klippy.log file (use zip to compress it, if too big). Pasting your printer.cfg is not needed
Be sure to check our “Knowledge Base” Category first. Most relevant items, e.g. error messages, are covered there
error when the Z probe is located on extruder carriage 2
Can you please attach your klippy.log as requested by the template?
j’ai modifier une imprimante CR10 S5 en idex qui fonctionne très bien depuis des années,avec la mise à jour klipper et la prise en charge du mode miroir et copie je me retrouve avec un problème.
Comme j’ai un touchmi comme capteur Z il est sur extrudeur 2 ce qui antenne des problème depuis la mise à jour. j’ai testé un capteur bouche sur extruder 1 et tout fonctionne correctement. le problème c’est mon bltouch beaucoup moins fiable que le touchmi qui ne peut être installé que sur extruder 2.
j’ai fait un teste en inversant dans klipper les extruder, l’extrudeur 2 du côté gauche et le 1 cote droite. Cela fonctionne sauf que le mode copie les chariot se déplace du mover côté.
Ca fait 3 jours que je fais plein de modifications pour contourner le problème, je pense que c’est un problème qui devrait être réglé dans klipper lui même avoir une option pour indiquer ou se trouve la sonde du Z sur extruder 1 ou extrudeur 2.
And please stick to the English language as already explained by @Sineos !
Use the Google translater or any other if you have difficulties.
And last request: one thread after the other and not many at once.
I modified a CR10 S5 printer to idex which has worked very well for years, with the klipper update and support for mirror and copy mode I find myself with a problem.
As I have a touchmi as a Z sensor it is on extruder 2 which causes problems since the update. I tested a mouth sensor on extruder 1 and everything works correctly. the problem is my bltouch which is much less reliable than the touchmi which can only be installed on extruder 2.
I did a test by reversing the extruders in klipper, extruder 2 on the left side and extruder 1 on the right side. This works except that in copy mode the cart moves from the side mover.
It’s been 3 days that I’ve been making lots of modifications to get around the problem, I think it’s a problem that should be fixed in klipper itself, which has an option to indicate where the Z probe is located on extruder 1 or extruder 2.
klippy.log (296.5 KB)
That is one overloaded and unstructered config. 
Why two Y motors for a cartesian printer?
My IDEX is a bed slinger as well (Anycubic i3 Mega) and does not have a bed probe but two mechanical Z endstops only.
I can only guess atm as I’m still driving with the IDEX Klipper branch from @dmbutyugin that you should home the print heads first and then maybe switch to T1 before probing Z.
it’s a large printer with a 50x50 tray
Can you maybe take a photo?
Why then two independent motors for Y (bed)?
This topic was automatically closed 60 days after the last reply. New replies are no longer allowed.
