Error log klipper/Anycubic vyper

[Sineos]

[H] Move exceeds maximum extrusion

Preventing an “unhealthy” amount of extrusion on short moves is a safety feature of Klipper. The default value is set to Maximum Extrusion = 4.0 x Nozzle_Diameter^2 = 4.0 x 0.4^2 = 0.640 mm² The error typically is caused by: Extreme settings for the prime line in the start gcode Extreme settings for a purge, e.g. on filament change Crappy gcode created by the slicer (especially S3D) Weird Slicer settings affecting the extrusion or flow rate Misplaced M83 commands (e.g. in start gcode) causi…