Hi,
i have changed temperature sensor in my printer.
before, on a Dragon Hotend, it was configured as [sensor_type: ATC Semitec 104GT-2], but when I changed it, I used a generic one, from aliexpress, (something like B3950).
When turning on the printer there is a considerable temperature difference with the ambient temperature, the ambient temperature (in the bed that has the original and coincides more or less with a thermometer) it is seen that the temperature is 26.2º, and the new sensor, that I have put in the Hotend, it is registering a temperature of 9.5º… If this is so at room temperature, at about 220º, the difference between the real one and the one that reads, is surely higher…
What is the way to configure this generic thermistor (by Aliexpress)?
Thank you