Getting orange pi 3 lts + klipper working with anycubic kobra 2 neo

[LifeOfBrian]

@Betzebub

Move exceeds maximum extrusion

Have a look here:

Move exceeds maximum extrusion (AA mm^2 vs BB mm^2)

Move exceeds maximum extrusion (AA mm^2 vs BB mm^2) Background Klipper has a safety mechanism that checks if a single move extrudes an unhealthy amount of filament or if the extrusion of multiple moves add up to such an amount. This limit is calculated according to following formula: Maximum Extrusion = 4.0 x Nozzle_Diameter^2 = 4.0 x 0.4^2 = 0.640 mm² For the standard 0.4 mm nozzle the default values calculates to: Maximum Extrusion = 4.0 x 0.4^2 = 0.640 mm² Reasons Misplaced M83 (Rela…

You might want to use absolute extrusion (M82) instead of relative extrusion (M83).