Basic Information: Printer Model: SIGMA D25 (2020) MCU / Printerboard: DEAD BOARD klippy.log Fill out above information and in all cases attach your klippy.log file (use zip to compress it, if too big). Pasting your printer.cfg is not needed Be sure to check our “Knowledge Base” Category firs…

If you didn’t used klipper previously, then most probably you don’t have dedicated “host” system like RPI. If it’s that case - then I would suggest to look at Manta M4P/M8P boar with additional CB1 Module - then you would have everything to run klipper in one package and don’t deal with separate “h…

Yes, you’re right, I’m studying and learning about and the M8P+CB1 is better for (6axis = idex). This board would prepare the environment to run Klipper. But I never needed to program or install anything in Klipper, I was just using it, but now the time has come to do it. I don’t know the measureme…

Well usually everybody try to use existing configurations for their control boards and machine design, so if you are looking to use manta M8P - klipper already contain sample basic configuration for this board, you can find it in sources “config/generic-bigtreetech-manta-m8p-v1.1.cfg” As I can see …

Thank you my friend for looking here, I’m better now. I’ll start by reading about Klipper and the other machines are working, so it would be a calm process. The objective of this modification would be to not lose $$ and modernize. As for time, no definition. Long time project because just ordering t…

When changing the extrusion system from 2.85mm to 1.75mm, in your experience, which one would you choose? Bowden or direct drive. If direct use “ORBITER” and if bowden use the "TITAN LEFT/RIGHT) and the modern V6 ceramic. ** All stopper OMRON SS-5-F 3 Pin, used 2 pin.

It depends how ridged your machine are, in your case you have 2 extruders, so if you are looking on DirectDrive (DD) you will add considerable weight to most moving part of the system - this will increase ringing effects and reduce speed. From other side with Bowden Drive (BD) with 1.75mm filament …

Good observations, let’s keep the traditional line much better. Maintain bowden and hotend Nice day tanks. **Getting good filaments measuring 2.85mm here in my country is increasingly difficult. This is why the change.

In that case I would look at Width sensor - klipper does have support for it. It will not resolve all possible issues - but it’s better than nothing :slight_smile:

What would this sensor be like and how it works.

Help please! sigma d25

General Discussion

gaolst March 17, 2024, 1:22am 5

I highly suggest first to read this topic: Klipper Architecture / Ecosystem
So you would have basic understanding about klipper architecture.

Topic		Replies	Views
Leapfrog Bolt pro - upgrade? General Discussion	102	1234	January 14, 2026
How to connect klipper to Makerbot Replicator 2X？ General Discussion	77	9853	May 6, 2024
Beginner: build, modify, or buy a new printer/kit? General Discussion	3	118	December 28, 2024
Config for Prusa Mk2.5S (Bear frame, Bear Extruder & TMC2209 drivers)? General Discussion	6	96	March 3, 2026
Klipper worth installing? Using PETG only General Discussion	25	3300	October 2, 2023

Help please! sigma d25

Related topics