Jog axis when not referenced?

[Uncle_guido]

Found it (i think)

Moving Z before homing or other

My bed goes to full extents when power off or klipper disconnect/restart. I use a probe for Z and need the Z_safe_home to z hop during G28. However, this is a problem (Z_SAFE_HOME) when the bed is at the full extent of travel. Core XY system where nozzle is at the top of machine and Z moves up to the nozzle. So I need to detect the homing state with {% if printer.homed_axes != ‘XYZ’ %} and make a Z move off the mechanical stop, then G28. If I could jog the Z during not homed status with a mac…

Guido