Basic Information:
Printer Model: Anycubic kobra 2
MCU / Printerboard: Trigorrila pro b 1.0.2
Host / SBC Rpi 3b+
klippy.log
ezyzip.zip (3.7 MB)
Fill out above information and in all cases attach your klippy.log file (use zip to compress it, if too big). Pasting your printer.cfg is not needed
Be sure to check our “Knowledge Base” Category first. Most relevant items, e.g. error messages, are covered there
Describe your issue:
Klipper randomly shuts down. it is not the first time it has shut down while printing causing failed prints and wasted plastic. im typicaly not at my printer while this happens but im getting told that nothing is happing when it has shut down
Never happend on shorter prints <1h long