Basic Information: Fisrt time using Klipper, mcu ‘mcu’: Unable to connect
Printer Model: Kobra 2
MCU / Printerboard:
Host / SBC Raspberry Pi 3 - running mainsailOS
klippy.log
klippy (7).log (192.9 KB)
Fill out above information and in all cases attach your klippy.log file (use zip to compress it, if too big). Pasting your printer.cfg is not needed
Be sure to check our “Knowledge Base” Category first. Most relevant items, e.g. error messages, are covered there
Describe your issue:
… Sorry Guys I am just lost at this point, I have been trying to follow these instructions, https://crororo.blogspot.com/kobra2klipper. I have been scouring forums looking for a fix or a suggestion of what to try next. Hopefully you guys can help me with the next thing to try.
admin1@raspberrypi:~/klipper $ ls /dev/serial/by-id/*
/dev/serial/by-id/usb-1a86_USB_Serial-if00-port0