Basic Information: Printer Model: Flyingbear Ghost (hybrid_corexy) MCU / Printerboard: MKS Robin Nano v1.2 klippy.log klippy.log (32.2 KB) Hello everyone! I assembled the printer on Markforged kinematics, and received incorrect movements along the Y axis (by command g28 y0 I get diagonal move…

Checked empirically, hybrid_corexy = cartesian movements - I think this is a bug.

The website for that printer indicates it’s corexy, not hybrid corexy.

It has been modified in this way: Markforged kinematics for FlyingBear Ghost 5 V2.0

I understand that Kevin’s resolution is needed on this issue?

I understand kinematics is rare. [markforged]

The hybrid-corexy kinematics were provided by the user “tircown”. Alas, I do not have the hardware and can’t provide much assistance. Alternatively, if you can identify the error in klippy/kinematics/hybrid_corexy.py then that may help. -Kevin

Markforged (hybrid_corexy)+ Klipper = Incorrect movements

General Discussion

Sineos November 18, 2022, 7:40am 6

Cannot really contribute, since I have no experience in this type of printer. Did you check Hybrid corexy(markforged) issue?

Topic		Replies	Views
Hybrid corexy kinematics problem General Discussion	1	250	November 28, 2024
Hybridcorexy kinematic issue during ztilt/quad gantry level General Discussion	6	187	November 12, 2025
Dual markforged/hybrid corexy problems General Discussion	4	155	December 21, 2025
Problem hybrid-corexy kinematic General Discussion	8	2715	January 17, 2024
Hybrid corexy(markforged) issue General Discussion	10	8604	April 15, 2026

Markforged (hybrid_corexy)+ Klipper = Incorrect movements

Related topics