Onix
1
Printer Model: Tronxy X5SA PRO
MCU / Printerboard: CXY-V6-191121
klippy (6).log (5.7 MB)
Hey guys! I am having issues with one of my printers. After ~20 minutes of printing it just freezes saying:
I checked the log but I have no idea what to look at.
Things I’ve already done:
- replaced the mainboard and the raspberry pi
- changed power supply on both, printer and raspberry
- rewire electronics and propper ground them
- changed multiple USB cables
Sineos
2
You are flooding Klipper with unknown and strange commands.
Unknown command:"M566"
Invalid M204 command "M204 P2200"
Find their source and fix them and repost a new log if there error reoccurs.
Onix
3
I have the same messages on the other printers but I simply filter them and everything works perfectly fine. The only issue is on this printer.
Sineos
4
Personally, I will not dig any deeper into this issue as long as these errors are in there. Get the obvious done first and then see where we stand.
1 Like