Must home axis first: 257.000 221.000 19.990 [0.000]

Basic Information:

Printer Model: Corexy
MCU / Printerboard:MKS PI 1.2
klippy.log
klippy.log (2.1 MB)

Fill out above information and in all cases attach your klippy.log file (use zip to compress it, if too big). Pasting your printer.cfg is not needed
Be sure to check our “Knowledge Base” Category first. Most relevant items, e.g. error messages, are covered there

Describe your issue:



klippy.log (2.1 MB)

Hello @Anyway !

More descriptive than just the topic would be quite helpful.

If you want to move to a certain point and the printer is not homed, you have to home.

1 Like

From the log it looks like an attempt to start a print without prior homing the printer.

From the log it looks like an attempt to start a print without prior homing the printer.

I agree with this, I was waiting for someone else to chime in to make sure I wasn’t misreading the log. There are a few gcode macros in Chinese but I couldn’t tell if those were a start print macro or not. Google translate was no help.

This topic was automatically closed 60 days after the last reply. New replies are no longer allowed.