Basic Information:
Printer Model:
MCU / Printerboard:
klippy.log
Fill out above information and in all cases attach your klippy.log file (use zip to compress it, if too big). Pasting your printer.cfg is not needed
Be sure to check our “Knowledge Base” Category first. Most relevant items, e.g. error messages, are covered there
Describe your issue:
…i just copy image on USB stick my Rasp PI good working SDCard, but since i boot from USB , mainsail or other cant see motherboard SKR Pico V1 connect direct to Serial pin on Pi .
If i use SDCard everythong
klippy.log (360.1 KB)
printer.cfg (2.9 KB)
ok…
Is a DIY Cartesian
