Basic Information:
Printer Model:
MCU / Printerboard:
Host / SBC
klippy.log
Fill out above information and in all cases attach your klippy.log file (use zip to compress it, if too big). Pasting your printer.cfg is not needed
Be sure to check our “Knowledge Base” Category first. Most relevant items, e.g. error messages, are covered there
Describe your issue:
…i am in middle of a semi custom build
the kinematics is a Monoprice mini v2
MCU Sunlu S8
raspberry pi 3b+ for klipper connected via usb
stealth burner style tool head.
i was able to flash klipper to the MCU(s8 board)
and mainsail to the PI
ISSUE:
using S8 Printer.cfg id like to edit it to add the proper build volume. but i dont see it in the file
how would i add the proper build volume and program the offsets?
keep in mind this is my first klipper build be kind 