Basic Information:
Printer Model: ender3, sprite pro, CR touch
MCU / Printerboard:ender 4.2.7
Host / SBC
klippy.log
klippy.log (100.7 KB)
I can not get Fluidd or Mainsail to connect to printer when using a web browser remotely. Moonraker error, “No moonraker connection http://192.168.1.249:4408”. Not even when
I’m at home on the same wifi network.
This was a basic ender3. I upgraded mother board V4.2.7, Creality Sprite pro, CR touch,Creality Nebula Pad, NEBULA-destinal-cfw-0.5-ota_img_V5.1.0.23 image loaded
Fill out above information and in all cases attach your klippy.log file (use zip to compress it, if too big). Pasting your printer.cfg is not needed
Be sure to check our “Knowledge Base” Category first. Most relevant items, e.g. error messages, are covered there
Describe your issue:
…