SO3 Toolboard with Biqu MicroprobeV2 coding issue

[OhPetya.exe]

Basic Information:

Printer Model: Remade Modix v2 with SO3 and SO3 Toolboard
MCU / Printerboard: Octopus Pro v1.1
Host / SBC CB1
klippy.log
klippy (2).log (799.1 KB)

Fill out above information and in all cases attach your klippy.log file (use zip to compress it, if too big). Pasting your printer.cfg is not needed
Be sure to check our “Knowledge Base” Category first. Most relevant items, e.g. error messages, are covered there

Describe your issue:

Hello!
I’m new to building a printer and am not good with coding. I do not know what to write under [stepper_z] endstop_pin:.
As far as I understand I need to write a pin name but I can’t make it work.

[OhPetya.exe]

After some more digging I found out that the line needs to be just like this:
endstop_pin: probe:z_virtual_endstop

And after that got to add the according probe .cfg (might require modification which can be found on forums as well, Facebook Orbiter page in this instance).