Basic Information: Printer Model: Ender 5 Plus MCU / Printerboard: Bigtreetech Manta M8p Host / SBC: Bigtreetech CB2 klippy.log Starting Klippy...Args: ['/home/biqu/klipper/klippy/klippy.py', '/home/biqu/pr - Pastebin.com foto of the board: Imgur: The magic of the Internet Describe your iss…

I figured out the problem. One of my stepper drivers is not working. Thanks for your help anyways.

I noticed that I did not reset the run_current to the recomended 0.8, but that’s what I was using. I just tested with 0.2 to see if that was the issue.

Please upload your klippy.log here and not on a file server. You also can upload images here.

klippy.log (212.6 KB) [thumbnail]

Did you properly set the motor voltage via the jumpers? The forth motor port is parallel to the third one and does not have its own stepper driver.

Do you mean set the jumpers so that the motors use the board power and not the high voltage? Yes, the jumpers are all on the same 2 pins, on the photo you can’t see the ones that have the stepper drivers on, but the others have the jumpers in the same pins. I use the 3rd and 4th motors for the z ax…

Stepper motors don't work with Manta m8p and CB2

General Discussion

Topic		Replies	Views
Stepper motors acting strange on new board General Discussion	7	1209	January 6, 2024
BIGTREETECH Manta M5P + CB1 + 5xTMC2208 Cant get steppers to move General Discussion	32	1612	February 20, 2024
Ender 3 stepper motors not working General Discussion	34	405	December 5, 2025
Stepper motor and fan not working General Discussion	10	807	May 18, 2023
Installed Klipper Mainsail and XYZE stepper motors not functioning General Discussion	1	66	November 18, 2024

Stepper motors don't work with Manta m8p and CB2

Related topics