The temperature readings of thermistors are increasing

Before when I started the 3d printer, the same temperature was displayed as the room temperature, but now it shows about 15 degrees higher than the room temperature. I have not changed the configuration file. The displayed temperature increases.

What can be wrong?klippy.log (641.7 KB)

Have you checked your wiring and / or replaced the thermistor? Maybe a cabling issue or a dead thermistor.

Hi Sineos.

I disconnected the thermistors and reconnected them again, and now it is showing the right temperature. I have no idea why it showed the faulty temperature before.
I am glad its working now, and I hope it continues to work :smile:

Thanks for your help Sineos.