TMC 'extruder' reports error

[Sineos]

There are already extensive topics on this issue:

TMC 'stepper_x' reports error: GSTAT: 00000001 reset=1(Reset)

Hi guys, for a few days now my previously working printer stopped working with the Error in the title. The error seems to happen primarily but not only on long y moves. I’ve tried to increase the run_current value, decrease movement speed, with no success. I’ve tried switching the stepper drivers, the cables and the motor itself, but the error persists. The stepper for which the error is reported varies from x, y, z and z1, never extruder though. I guess this is somehow related to the new …

TMC 'extruder' reports error: GSTAT: 00000001 reset=1(reset

So have had this happen tree times in a row now. Tried re-slicing, updated to latest klipper, and atm testprinting with swapped cable with theY axis one. I’m reading it most likely could be wiring, voltage or steppers. And also seeing that it could be PA related, and in one case usb related. (Will change mine if happens again) This is a brand new SKR E3 Turbo card, with integraded 2209 steppers. Voltage has not been tuned anything. Should i? Ender 5 Plus [244621520_4565467280183352_1222008…

Please be so kind to search the already available resources before opening a new topic.