Hi there te correct solution is:
from this source: Thermistors for Klipper | LDO Documentation
and datasheet: https://atcsemitec.co.uk/wp-content/uploads/2019/01/Semitec-NT-4-Glass-NTC-Thermistor.pdf
[thermistor ATC Semitec 104NT-4-R025H42G]
temperature1: 25
resistance1: 100000
temperature2: 160
resistance2: 1074
temperature3: 300
resistance3: 82.78
[extruder]
sensor_type: ATC Semitec 104NT-4-R025H42G
min_temp: -50 #<-- important
max_temp: 300 #<-- important
Your printer is shutdown because min temp is in negative value. See the minimal temp on datasheet i see -50 value.
Regards