Z crash problem during the probe with an inductance probe is OK

[toutain]

Hello everyone,
I have a 1 cubic meter home made printer to print wheelchair cushions. It was working very well until now when the Z crashed during the Probe. The probe seems to work well with the QUERY_ENDSTOPS command; there is indeed the indication open then “TRIGGERED” after relaunching the command and presenting a metal part in front of the sensor.
I admit I don’t understand where the problem could come from.
Obviously I have armchair cushions waiting and am in an EMERGENCY!!!

Basic Information:

Printer Model: Home made
MCU / Printerboard: Octopus
Host / SBC
klippy.log

Fill out above information and in all cases attach your klippy.log file (use zip to compress it, if too big). Pasting your printer.cfg is not needed
Be sure to check our “Knowledge Base” Category first. Most relevant items, e.g. error messages, are covered there

Describe your issue:

…

[EddyMI3D]

Hello @toutain !

SIGH

[toutain]

Hy
sorry i didn’t anderstand what is Klippy.log? is it the machine configuration (printer.cfg)?

It seem that the problem is the cable. If i change position of the head it works.

[EddyMI3D]

@toutain

what is Klippy.log?

The klippy.log makes a protocol of all what happens.

On Mainsail you find it here:

On Fluidd here:

[toutain]

Ok thank’s next time i will do this.
Now i need to find flexible cable