Basic Information:
Printer Model: RatRig Style
MCU / Printerboard: BTT Octopus Pro
Host / SBC
Klipper log
klippy(1).zip (844.4 KB)
Hello,
I installed the Beacon probe on my printer on the way how it is explained on the Beacon homepage.
When I want to calibrate the probe I do the following:
G28 X Y
G0 X206 Y187
BEACON_CALIBRATE
TESTZ Z=-1
Then Klipper shows up following error message:
“Must home axis first: 206.000 187.000 442.000 [0.000]”
Does someone know where the mistake is?
Thanks, Timo
