Define Pin when Z moving down while probing

[Fehrler]

I hope it can help someone else!

Solved Problem to tare Probe when Bed Meshing

Hi there! I had a problem to tare my probe when the Bed Meshing is in progress. My Printer is a Mingda MagicianX with a piezo(like) probe with MCU and 2 Signal Pins. One Signal for Probing and one for tare. I created a macro that tares the probe on every probing move. Add this Code into Probe Section: [probe] activate_gcode: set_tare Set the output pin for tare signal in your printer.cfg [output_pin tare] pin: !PE5 # SKR 3 Servo PE5 / PIN 12 (u103) on Mingda Hotend value: 0 Add this Gco…