Does anyone know what is causing this?

[1001k]

Basic Information:

Printer Model: Anycubic Mega X
MCU / Printerboard: BTT skr 1.4 turbo
Host / SBC Mainsail

klippy.log (3.8 MB)

klippy.log

Fill out above information and in all cases attach your klippy.log file (use zip to compress it, if too big). Pasting your printer.cfg is not needed
Be sure to check our “Knowledge Base” Category first. Most relevant items, e.g. error messages, are covered there

Describe your issue:

After i switched to a HDX lite v2 and a triangle labs CHC i’ve been having extrusion issues.

…

[1001k]

Head Phones stand (2)_PETG_1h19m.gcode (4.9 MB)

config-20260613-122959.zip (26.7 KB)

Here are my configs and gcode

[hcet14]

@1001k

After i switched to a HDX lite v2 and a triangle labs CHC

That is a complete new extruder setup for your printer. I would not expect reasonable results with your old Klipper settings.
Did you try Extruder Calibration | Ellis’ Print Tuning Guide?

[1001k]

I will try it