Basic Information: Printer Model: ender 3 MCU / Printerboard:skr mini e3 v3 klippy.log klippy (4).log (4.9 MB) Fill out above information and in all cases attach your klippy.log file (use zip to compress it, if too big). Pasting your printer.cfg is not needed Be sure to check our “Knowledge …

Hello @alfa ! Can you explain what problems you exactly have? Error messages? Misbehaviour?

i can’t calibrate the z-axis. mesh test no good. printhead is digging in the bed. whe i try to calibrate mesh it stops and message “No trigger on probe after full movement” the z motor is trying to punch my bed with a lot of noise. my klippy log: klippy (4).log (4.9 MB) the print head is pushing …

this is my moonraker log: moonraker (4).log (353.0 KB)

this is my printer.cfg : printer (1).cfg (3.5 KB)

Prtinter is Ender 3 with btt skr mini e3 v3 motherboard and original cr-touch.

software is running on pc and hdmi 7" screen. [image]

screen 7 inch [20231101_223506]

by the way…i am a radio amateur too . ON4AZC

and Münster is a great city. i have been there with the family. Grüsse Albert

Ender 3 with btt skr e3 v3 board and cr-touch

General Discussion

Sineos November 2, 2023, 11:49am 15

See Move out of range: X Y Z [E] for an explanation and Understanding X and Y Axes Limits and Homing for an approach how to define this correctly.

Topic		Replies	Views
Ender 3 V2 modified with direct drive extruder and BL Touch General Discussion	3	2166	September 16, 2023
Ender 3 pro btt skr mini v3 no mcu General Discussion	8	137	February 15, 2025
My Ender 3 V2 with CR-Touch Klipper config Issues General Discussion	4	1295	November 17, 2024
Ender 3 Pro x-endstop problem General Discussion	7	192	January 20, 2024
Klipper ERROR Lines in [bed_mesh_default] General Discussion	3	77	July 14, 2026

Ender 3 with btt skr e3 v3 board and cr-touch

Related topics