Basic Information:
Printer Model: Sovol Sv08
MCU / Printerboard:
Host / SBC
klippy.log
klippy.log (371.4 KB)
Describe your issue:
hi, I have been trying to upgrade my 3d printer Sovol “SV08” to full Klipper. everything goes great until flashing the MCU it freezes at “Attempting to connect to bootloader” I’m not sure what to do. I have verified my MCU id by disconnecting the toolhead and running “ls -la /dev/serial/by-id/”
biqu@sv08:~$ ls -la /dev/serial/by-id/
total 0
drwxr-xr-x 2 root root 60 Feb 12 17:17 .
drwxr-xr-x 4 root root 80 Feb 12 17:17 …
lrwxrwxrwx 1 root root 13 Feb 12 17:17 usb-katapult_stm32f103xe_32FFDC054747393933591657-if00 → …/…/ttyACM0
b
[klippy.log|attachment]
(https://klipper.discourse.group/uploads/short-url/mSAIr7rgMiUMotAREbtScdu7gvd.log) (371.4 KB)
…