Basic Information: Printer Model: Ender 3 Pro with CR Touch and direct drive extruder MCU / Printerboard: 4.2.2 Host / SBC: Raspberry Pi 3B+ klippy.log: Fill out above information and in all cases attach your klippy.log file (use zip to compress it, if too big). Pasting your printer.cfg is n…

Hello @mjmiller ! [image] mjmiller: it’s not taking the temps from my slicer What is the start code in the slicer is looking like? Do you passe the values over to Klipper within that?

So I’m completely new to Klipper I’m using Cura, I just have START_PRINT to call the start print macro. I have the defaults in the START_PRINT Macro and that’s what gets loaded everytime. I suspect Cura isn’t passing something correctly and it’s probably user error. I cobbled together the macro I’m …

Cura, I have profiles from when I was using Marlin that I don’t really want to have to set up from scratch, but it is what it is right now.

Please use the Preformatted Text feature of the forum editor for posting code snippets: [Format] And please attach the start G-code of the Slicer [grafik]

START_PRINT Is the entire start code in CURA. I used to have a bunch of other stuff in there for Marlin because I was using a different flavor of it than the stock creality. I should still have it somewhere if you need to see it.

So there are no heating parameters passed over to the printer. You may have a look here: Using START_PRINT and END_PRINT Macros

Thank you, that part seems to have worked, if I can pick your brain about one more thing, settings like pressure advance don’t get saved. And while I can calibrate my z offset it doesn’t load it correctly even though it’s saved in the file. My call looks like this:SET_GCODE_OFFSET Z={z_offset} but w…

After calibration, did you perform a SAVE_CONFIG to store the new values?

I believe so this is in the generated section: #*# [bltouch] #*# z_offset = 1.730 But when I start a print it just says z offset 0 and I have to tune it in the first few seconds of the print while it’s laying down a brim.

Klipper not taking settings from slicer or saving changes from dashboard

General Discussion

Sineos February 6, 2025, 7:39pm 16

See Example: Search Printer Objects. It should be largely self-explanatory.

2 Likes

Topic		Replies	Views
Temp and Fan Settings not transferred via slicer General Discussion	14	2237	May 24, 2024
Klipper Documentation for Extruder Temp is out of date Features	5	1122	November 9, 2023
Help With START_PRINT General Discussion	8	2861	December 8, 2024
All temeratures are 0 as soon as first layer starts / Slicer-Start Macro-Klipper interdependency General Discussion	7	235	May 25, 2024
Doubts about temperatures and slicers General Discussion	6	92	January 22, 2026

Klipper not taking settings from slicer or saving changes from dashboard

Related topics