Basic Information:
Printer Model: longer lk5 pro
MCU / Printerboard: skr mini e3 v3
Host / SBC fluid
kippy log 2.zip (16.7 KB)
klippy.log
Fill out above information and in all cases attach your klippy.log file (use zip to compress it, if too big). Pasting your printer.cfg is not needed
Be sure to check our “Knowledge Base” Category first. Most relevant items, e.g. error messages, are covered there
Describe your issue:
I’m having an issue with my Klipper screen not working after re install of Klipper i keep getting error 401 cant communicate through moonraker iv tried a compete format of the sd card in my raspberry pie and reinstalled everything in kuiha as instructed i can communicate fine with Klipper but the screen connected to the raspberry pie keeps showing the error i also tried adding the ip address to the trusted devices as someone recommended but still wont work everything was fine before the sd card failed and system wouldn’t boot so purchased a new card and reinstalled any help would be really appreciated!!!
…