New Voron 2.4 r2 using Canbus 2209 /2240 Octopus v1.1 ,u2c bttpi

Basic Information:

Printer Model:
MCU / Printerboard:
klippy.log

Fill out above information and in all cases attach your klippy.log file (use zip to compress it, if too big). Pasting your printer.cfg is not needed
Be sure to check our “Knowledge Base” Category first. Most relevant items, e.g. error messages, are covered there

Describe your issue:

Unable to parse option ‘stealthchop_threshold’ in section ‘tmc2209 stepper_z3’
I have been chasing problems for about 2 weeks maybe longer thought i had it beat when this last error came up. First time user not sure how to paste klipper log must have missed the button

Hello @Tim372 !

Please attach the klippy.log to your next post.

1 Like

klippy 26 dec.log (225.2 KB)

Just drag’n’drop it into the edit field or use the attach button.

Fix:
grafik

1 Like

Thank you all fixed that problem but this was the original problem. This one i have tried to read up on and still coming to grips with Klipper and mainsail used marlin an octoprint before.
“mcu ‘mcu’: Unable to connect”
I don’t seem to be able to get a port at the end of the Serial Number as I believe it should. I have reloaded everything and restarted, klipper, katapult etc.
klippy 2 dec 2023.txt (249.9 KB)