Shut Down of Klipper by z-homing

General Discussion
1

Basic Information:

Printer Model: Anycubic Mega X
MCU / Printerboard: Raspberry Pi 4
klippy.log
klippy-2.log (3.4 MB)

Hi together,
I’m new with Klipper and I’ve read the other topic: mcu-shutdown-when-homing/2254! :slight_smile:
I have installed a BLTouch 3.1 and every time I will do a homing it goes in a shutdown in that moment the printer wants to do z-homing. As read in the topic 2254 I’ve cloned my SD to another SD. I have removed my raspberry camera and do not play any games or other stuff by starting the homing :slight_smile: . I hope somebody can help me, because I have tested a lot of stuff, also in the printer.cfg. Without endstop_pin = probe:z_virtual_endstop all is functioning. But with the BLtouch as Endstop the issue occurs.

Thanks in advance.
Mark

2 
[stepper_z1]
step_pin = PC1
dir_pin = PC3
enable_pin = !PC7
microsteps = 16
rotation_distance = 4
endstop_pin = ^!PL6

Remove the endstop_pin

3

Thanks Sineos. That was it. What an error, sometimes you can’t see the forest for the trees :slight_smile: Thanks a lot for the quick and best answer.
Mark