SKR 2 - Mercury 1.1 issue

General Discussion
1

Basic Information:

Printer Model: Mercury 1.1 (Ender 5 plus)
MCU / Printerboard: BTT SKR 2
Host / SBC: raspberry Pi4b
klippy.log

Fill out above information and in all cases attach your klippy.log file (use zip to compress it, if too big). Pasting your printer.cfg is not needed
Be sure to check our “Knowledge Base” Category first. Most relevant items, e.g. error messages, are covered there

Describe your issue:

…so I have complied my firmware.bin file at least 6 times trying to get the board and the Pi to communicate. Once the printer is done seeming to update the firmware the screen on the printer is asking for the Pi login and password. So I know I’m doing something wrong just not sure what.

I also have an EBB42 tool board and a raspberry pi can hat for communication there but I haven’t even gotten that far yet. Any help would be awesome !!

2

Take a screenshot of the menuconfig options you used when generating your firmware.bin

3

This topic was automatically closed 60 days after the last reply. New replies are no longer allowed.