Information:
Anycubic Kobra Plus
Huada Semiconductor HC32F460 / Stock Anycubic Board w/resistor swapped from r65 to r66 as config file states, BTT PAD7
klippy (1).log (2.1 MB)
config.txt (4.0 KB)
Very new to this kind of stuff, First off on the Marlin firmware this printer was working well, recently got a BTT pad7 to add klipper to my Kobra Plus. Was able to get the config and board flashed, I have got the printer and board connected, mainsail working. I can control extruder temp etc, when I go to home all axis I get an error.
“Unable to read tmc uart ‘stepper_x’ register IFCNT Once the underlying issue is corrected, use the “FIRMWARE_RESTART” command to reset the firmware, reload the config, and restart the host software. Printer is shutdown”
Any tips to help me resolve this would be appreciated. Sorry if I missed something im still learning.
Thanks
Dave
…