Basic Information:
Printer Model: Maker Select Plus
MCU / Printerboard: STM/A64/Recore A7
klippy.log (3.0 MB)
Describe your issue: I am getting a lot of negative feedback from my current .cfg file in the form of MCU Shutdown: ADC out or range.
So, some of the time, it homes and at other intervals, no homing can take place even when I DO NOT change the .cfg file in question.
The motor seems to start homing when it wants now. I have a Maker Select Plus w/ a Recore board.
Please let me know how I can be of more assistance for getting you to help w/ my errors.
To diagnose the issue, I have altered the state of the pins multiple times, changed the .cfg file, and repeated to see if it was me.
On the second photo, the one on the bottom, there are pins I wanted to show.
These pins from left to right are:
- Black : X endstop
- Red : Y endstop
- White: Z endstop
…
- Black : Hotend thermistor
- Black : Heated bed thermistor
Could these ADC errors be due to connections or the wrong connections or is it .cfg related?
Seth
UPDATE
Done…I figured it out. It is my concern now. I MADE A MISTAKE.