I checked it many times and kept getting this error [423048886-c11a101b-29aa-4186-a64c-d56175c37843] Configuration fragment This is the configuration file printer (1).cfg (3.9 KB) This is the log file klippy (2).log (13.1 KB) I want to use this motherboard as a robotic arm I am very depress…

[image] anons: I am very depressed. Yes, me as well: [grafik] Please stick to the template you have deleted. Also see How-To Ask for Help

Almost impossible to help without your full klippy.log, printer.cfg, and any included cfg files attached and not pasted! Normally this type of error comes from an incorrectly formatted cfg file. Please make sure you attach the files listed above.

Please look at the problem again

Git version: 'v0.12.0-458-gd886c1761-dirty' Modified files: klippy/configfile.py And then an error in the configfile, suspicious. I see that you have reset the file to the git version. Did you restart the klipper service sudo systemctl restart klipper after you reset that file back?

See if there is any error in my configuration file

I’ve been working on this problem for days, with no result

The motherboard is an mks monster8 v2.0

I’ve stumbled about these lines in your config: 10 & 14 and 9 & 12 [stepper_x] step_pin: PC14 dir_pin: PC13 enable_pin: !PC15 microsteps: 16 rotation_distance: 18 endstop_pin: ^PA14 position_endstop: 0 position_max: 200 homing_speed: 100 position_min: -90 position_max: 90 homing_positive_dir: tr…

I want to use this motherboard to do 6 axis manipulator development, these are some necessary parameters

Option 'step_pin' is not valid in section 'stepper_x'

General Discussion

Sineos March 15, 2025, 2:59pm 2

Yes, me as well:

Please stick to the template you have deleted. Also see How-To Ask for Help

Topic		Replies	Views
Another 'Option 'step_pin' is not valid in section 'stepper_x' General Discussion	4	242	April 2, 2025
Error 'step_pin' is not valid in section 'stepper_z1' General Discussion	3	3721	March 13, 2022
Getting an error that 'Step_Pin" must be specified, but it already is? General Discussion	4	750	February 5, 2024
Error: Option 'pin' is not valid in section 'stepper_z' General Discussion	2	2812	November 17, 2022
Option 'step_pin' is not valid in section 'stepper_z2' General Discussion	1	566	February 20, 2024

Option 'step_pin' is not valid in section 'stepper_x'

Related topics