QGL issue after update and installing Klipperscreen

[Basti1984]

Basic Information:

Printer Model: Voron 2.4
MCU / Printerboard: Octopus
Host / SBC Pi4
klippy.log

klippy.log (146.1 KB)

Describe your issue:

I use Cartographer in CAN configuration since several weeks. Yesterday I installed KlipperScreen and update my machine.

Display works fine, also Homing and all the other functions.

But, when I try to start QGL Klipper crashes.

Attached log file and all my config files. It’s a very basic config, but still in the beginning.

Maybe sombebody has a good idea?

printer.cfg (18.4 K)

[cardoc]

@Basti1984

I use Cartographer in CAN configuration since several weeks.

Bed Mesh Error

Basic Information: Printer Model: Ender 3 lots of mods MCU / Printerboard: 4.2.7 Host / SBC Pi klippy.log Fill out above information and in all cases attach your klippy.log file (use zip to compress it, if too big). Pasting your printer.cfg is not needed Be sure to check our “Knowledge Base” Category first. Most relevant items, e.g. error messages, are covered there Describe your issue: So for giggles and a learning curve I decided to try Cura slicer. … well now I have issues The proc…