QGL issue after update and installing Klipperscreen

[cardoc]

@Basti1984

I use Cartographer in CAN configuration since several weeks.

Bed Mesh Error

Basic Information: Printer Model: Ender 3 lots of mods MCU / Printerboard: 4.2.7 Host / SBC Pi klippy.log Fill out above information and in all cases attach your klippy.log file (use zip to compress it, if too big). Pasting your printer.cfg is not needed Be sure to check our “Knowledge Base” Category first. Most relevant items, e.g. error messages, are covered there Describe your issue: So for giggles and a learning curve I decided to try Cura slicer. … well now I have issues The proc…