Start print error

[Brian.wendel6]

Basic Information:

Printer Model: Artillery Sidewinder X1
MCU / Printerboard: Mks gen L
Host / SBC Raspberry Pi 5
klippy.log
klippy (1).log (169.0 KB)

Fill out above information and in all cases attach your klippy.log file (use zip to compress it, if too big). Pasting your printer.cfg is not needed
Be sure to check our “Knowledge Base” Category first. Most relevant items, e.g. error messages, are covered there

Describe your issue:

I’m using “Clanks-Klipper-Configs/SideWinder X1 BLTouch.cfg at master · Clank50AE/Clanks-Klipper-Configs · GitHub”
For my printer.cfg. getting and error
‘Default _parameter _bed_temp’
I’m new to klipper. I’ve googled this and looked at other examples. Not sure whats incorrect. Can i get some direction on fixing this. Thank you for your help
…

[EddyMI3D]

You may have a look how to setup a START_PRINT macro:

Using START_PRINT and END_PRINT Macros

Using START_PRINT and END_PRINT Macros Rationale The START_PRINT and END_PRINT macros are optional but can be used to standardize the printer’s initialization process across different machines. They provide more control over the initialization procedure, which can be particularly useful for printers that require more complex initialization steps. The idea behind them is simple: The slicers offer an abundance of variables, e.g. the extruder / bed temperature of the first layer, Z-offsets, etc T…